|
|
Minimum Price $14.50
Minimum size 7 1/2" X 7 1/2"Standard back is white.
Add matching back for $5 per door.
Order matching back on all your doors
and matching back on your drawer fronts
is included.
How To Order A Sample:
Simply order a single door. We suggest ordering a door the same size as your smallest existing kitchen cabinet door. That way, if you decide to place a complete order, you will already have a usable door. |
RTF Door Clean and Bright Collection per square foot
Price: $14.50
|
| |
|
|
Minimum price $13.06 (flat drawer front)Drawer fronts have three choices:
Routed soft panel (min height 5.5")
Adds $7 for routing.
Routed sharp panel (min height 5.5")
Adds $7 for routing.
Flat panel (min height 3.5") |
RTF Drawer Front
per square foot
Price: $13.06
|
| |
|
|
| Our Self-adhesive Matching Veneers are made especially for kitchen cabinet refacing. Use them to reface your existing cabinet stiles and rails. Each sheet is 2'X8' feet. Order approximately 1 sheet per 10 cabinet openings. | |
Matching RTF Self-adhesive Veneer
Price: $129.00
|
| |
|
|
| Single glass pane doors must be at least 10" wide. Mullion doors with 4 or 6 lites must be at least 13 1/2" wide. All glass doors must be at least 14" tall. | Note: Glass Not Included |
RTF Mullion Doors for Glass
|
| |
|
|
| Maximum size 48" X 96" X 1/4"
Price shown
is minimum price.
Measure matching pre-cut end panels to go on the sides of your cabinets before you reface the stiles and rails. If you are using molding along the walls, measure 1/8" less. | |
RTF Pre-cut End Panels
Price: $5.21
|
| |
|
|
| These are beautiful, fully assembled, dovetailed drawer boxes. Bottoms have a 1/4" reveal.
Subtract 1" from the width and height of your cabinet drawer opening for typical, side mounted drawer slides. See the instructions for your drawer slides to confirm or purchase our side mount drawer slides.
Typical depth for drawer boxes is 22" kitchen and 16" bath vanity. |
|
Drawer Boxes
Price: $34.95
|
| |
|
|
|
RTF Moldings (8' length)
|
| |
|
